Run a local chain

Overview

This guide explains how to run a local chain for development and testing purposes.

Prerequisites

Before you start, complete following prerequisites:

• Install Go 1.22.3 or later.
• Install just.

tip

You can install just it using brew:

brew install just

Option 1. Run a just script

The simplest way to run a local chain is initiating a just script that builds the chain binary and then creates, configures, and runs a new chain.

1. Clone the repository

Clone the Warden Protocol repository and navigate to the root directory:

git clone https://github.com/warden-protocol/wardenprotocol
cd wardenprotocol

2. Execute the script

Then execute the just script:

just localnet

You'll see blocks being produced and height incrementing.

note

You can check the settings of your node in the genesis file: $HOME/.warden/config/genesis.json. There you'll find two validator addresses, a Keychain, a Space, and other settings. See accounts, keychains, spaces, etc.

Option 2. Use a devnet snapshot

You can use a devnet snapshot with prebuilt node settings.

1. Clone the repository

Clone the Warden Protocol repository and navigate to the root directory:

git clone https://github.com/warden-protocol/wardenprotocol
cd wardenprotocol

2. Build the binary

Then use just to build the chain binary:

just wardend build

This will build the chain binary called wardend and install it in your $GOPATH.

You can check the binary location and version with these commands:

which wardend
wardend version

3. Download the snapshot

Download the devnet snapshot and extract it to ~/.warden:

wget https://github.com/warden-protocol/snapshots/raw/main/devnet.tar.gz
mkdir ~/.warden
tar -xvf devnet.tar.gz -C ~/.warden

tip

If you wish to use an alternative starting point, check GitHub for other snapshots.

4. Run the chain

Finally, run the chain:

wardend start

You'll see blocks being produced and height incrementing.

note

You can check the settings of your node in the genesis file: $HOME/.warden/config/genesis.json. There you'll find two validator addresses, a Keychain, a Space, and other settings. See accounts, keychains, spaces, etc.

Option 3. Configure manually

1. Clone the repository

Clone the Warden Protocol repository and navigate to the root directory:

git clone https://github.com/warden-protocol/wardenprotocol
cd wardenprotocol

2. Build the binary

Then use just to build the chain binary:

just wardend build

This will build the chain binary called wardend and install it in your $GOPATH.

You can check the binary location and version with these commands:

which wardend
wardend version

3. Create and configure a chain

In this flow, you'll create and configure your chain manually.

1. Initialize a local node. Specify a human-readable name (moniker) and ID for your chain:

   wardend init my-chain-moniker --chain-id my-chain-id

   You can find your new node in the $HOME/.warden/config directory. For the genesis file, see $HOME/.warden/config/genesis.json.

2. Set the correct denomination in uward across the genesis file:

   sed -i 's/stake/uward/g' ../.warden/config/genesis.json

3. Create a key pair, specifying a custom key (validator account) name:

   wardend keys add my-key-name

   You'll be prompted to create a passphrase, which is required for confirming some of the next steps.

   warning

   After you enter the passphrase, the node will return the validator account address and a mnemonic phrase. Note them down: you'll need this data for recovering your account if necessary.

4. Add a genesis (validator) account. Specify your key name and the number of tokens staked:

   wardend genesis add-genesis-account my-key-name 250000000000000uward

   This will add your address to the accounts section of the genesis file.

5. Generate a genesis transaction. Specify your key name, the amount to stake, and the chain ID:

   wardend genesis gentx my-key-name 1000000000000uward --chain-id my-chain-id

6. Collect genesis transactions:

   wardend genesis collect-gentxs

   This will add your transaction to the gen_txs section of the genesis file.

7. Validate the genesis file:

   wardend genesis validate-genesis

   You should receive a confirmation that genesis.json is a valid genesis file.

8. Set the minimum gas price:

   wardend config set app minimum-gas-prices 0uward

   This command will update the minimum-gas-prices field in $HOME/.warden/config/app.toml. For testing purposes, we recommend setting the gas price to 0. Otherwise, you'll have to add a --fee flag to all transactions, such as creating a Keychain or a Space.

4. Run the chain

Finally, start your node:

wardend start

You'll see blocks being produced and height incrementing.

5. Add more settings

In the previous steps, you configured your node with the minimum settings required for running it. However, for testing purposes, you may need to enable more features – for example, a Space and a Keychain.

Create a Keychain

1. While the node is running, execute the command below in a separate terminal window. Specify a custom keychain description, your key name, and the chain ID:

   wardend tx warden new-keychain \
     --description 'my-description' \
     --from my-key-name \
     --chain-id my-chain-id

2. Enter your passphrase and confirm the transaction.

3. After that, you can query the node to check the result:

   wardend query warden keychains

   The output should look like this:

   keychains:
   - admins:
     - warden1h7akmejqcrafp3mfpjqamghh89kzmkgjzsy3mc
     creator: warden1h7akmejqcrafp3mfpjqamghh89kzmkgjzsy3mc
     description: my-description
     id: "1"
   pagination:
     total: "1"

Create a Space

1. To create a Space, run the following command. Specify your key name, and the chain ID:

   wardend tx warden new-space \
     --from my-key-name \
     --chain-id my-chain-id

2. Enter your passphrase and confirm the transaction.

3. After that, you can query the node to check the result:

   wardend query warden spaces

   The output should look like this::

   pagination:
     total: "1"
   spaces:
   - creator: warden1h7akmejqcrafp3mfpjqamghh89kzmkgjzsy3mc
     id: "1"
   owners:
   - warden1h7akmejqcrafp3mfpjqamghh89kzmkgjzsy3mc

Result

If the chain is up, you'll see logs every time a new block is produced (approximately every second).

You should also be able to query the chain and access data from the genesis block. For example, you can run the following in a separate terminal window:

wardend status

The output should contain status information about your node:

{
  "node_info": {
    "protocol_version": {
      "p2p": "8",
      "block": "11",
      "app": "0"
    },
    "id": "7165651eb07db46b86694db04bc29a83b682981f",
    "listen_addr": "tcp://0.0.0.0:26656",
    "network": "my-chain-id",
    "version": "0.38.7",
    "channels": "40202122233038606100",
    "moniker": "my-chain-moniker",
    "other": {
      "tx_index": "on",
      "rpc_address": "tcp://127.0.0.1:26657"
    }
  },
  "sync_info": {
    "latest_block_hash": "B1C32EBAF2711ECBF051A790E7B478040988401B5A05AFF63C976FBB646F863E",
    "latest_app_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
    "latest_block_height": "1",
    "latest_block_time": "2024-08-07T09:55:49.182399584Z",
    "earliest_block_hash": "B1C32EBAF2711ECBF051A790E7B478040988401B5A05AFF63C976FBB646F863E",
    "earliest_app_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
    "earliest_block_height": "1",
    "earliest_block_time": "2024-08-07T09:55:49.182399584Z",
    "catching_up": false
  },
  "validator_info": {
    "address": "349AB1D6A70EE7F83B1C11A51CA72A11DFF1EBB3",
    "pub_key": {
      "type": "tendermint/PubKeyEd25519",
      "value": "q/OralvfqN2OpLGvCWaVAlkYSjI45Rtp3AOLdrMhJ3xCc="
    },
    "voting_power": "1000000"
  }
}

tip

You can use other wardend commands to interact with the node. Just run wardend to see a list of available commands.

tip

If you need to stop the node, use Ctrl + C. Note that when you run the chain again, it'll start from block 0.